F400D全称Filtrasorb 400D，价格单位：RMB/KG。 起订量500公斤以上，含税广州或上海出厂。 原产地中国。
包装：25公斤黑色阀口袋包装带Calgon字样logo。
交货期：确认订单且收到货款后3个工作日发货。

销售规格（有意向客户可微信或邮件索取中文翻译）
IODINE NUMBER,1000 mg/g min, TM-4,ASTM D4607
MOISTURE (AS PACKAGED), wt%, 2%max,TM-1,ASTM D2867
ABRASION NUMBER, 75min, TM-9,AWWA B604
DENSITY (APPARENT), 0.42-0.52g/cc, TM-7,ASTM D2854
EFFECTIVE SIZE, 0.55-0.75mm,TM-47,ASTM D2862
UNIFORMITY COEFFICIENT ,1.9max,TM-47,ASTM D2862
ASH, wt%, 12%max, ASTM D2866,TM-5
METHYLENE BLUE NUMBER，250min,TM-11
HARDNESS NUMBER, 90min, ASTM D3802
12 US MESH [1.70 mm], 5% max, TM-8,ASTM D2862
< 40 US MESH [0.425 mm] (PAN), 4%max,TM-8,ASTM D2862

适用于啤酒、饮料、工艺用水等预处理。寿命比普通煤质活性炭高出80-125%。

价格单位：RMB/KG, 2吨以上天津含税出厂。
SR460 和 SR480 是直径 4mm 的煤质柱状活性炭， 该系列活性炭专门设计用于去除空气或废气排放的 VOC(挥发性有机物)和用于油气/溶剂回收工艺。SR 系列活性炭优选中国低灰分，高活性的煤炭原料，经过磨粉至 50 微米以下，挤压成条，干燥，炭化， 900 摄氏度以上还原性气氛水蒸气活化而成。严苛的生产工艺产出具有高度发达的微孔结构的柱状活性炭。这种活性炭具备很高的比表面积和合适的孔隙结构分布,从而能对从小分子量到大分子量，从支链到支链甚至环烷烃和芳烃结构的多种有机物分子的吸附。

应用
SR 系列活性炭适用于油气/溶剂回收应用。油气/溶剂回收工艺流程通常是吸附饱和-再生恢复吸附容量的过程。其系统主要由 2 个多个炭罐构成，一个炭罐在吸附 VOC 时，另外一个炭罐通常正常进行脱附（也称在线再生）操作。大部分油气回收系统采用高温水蒸气再生，也有部分系统采用热氮气或者抽真空方式再生。油气回收操作既节省了企业补充溶剂的成本，也减少了油气排放对环境的负面影响。

SR460 和 SR480 是直径 4mm 的煤质柱状活性炭， 该系列活性炭专门设计用于去除空气或废气排放的 VOC(挥发性有机物)和用于油气/溶剂回收工艺。SR 系列活性炭优选中国低灰分，高活性的煤炭原料，经过磨粉至 50 微米以下，挤压成条，干燥，炭化， 900 摄氏度以上还原性气氛水蒸气活化而成。严苛的生产工艺产出具有高度发达的微孔结构的柱状活性炭。这种活性炭具备很高的比表面积和合适的孔隙结构分布,从而能对从小分子量到大分子量，从支链到支链甚至环烷烃和芳烃结构的多种有机物分子的吸附。

应用
SR 系列活性炭适用于油气/溶剂回收应用。油气/溶剂回收工艺流程通常是吸附饱和-再生恢复吸附容量的过程。其系统主要由 2 个多个炭罐构成，一个炭罐在吸附 VOC 时，另外一个炭罐通常正常进行脱附（也称在线再生）操作。大部分油气回收系统采用高温水蒸气再生，也有部分系统采用热氮气或者抽真空方式再生。油气回收操作既节省了企业补充溶剂的成本，也减少了油气排放对环境的负面影响。

CANETSC12X40 is virgin activated carbon designed fortreatment of cane sugar liquors. In addition to the greatdecolorization power available in this high surface area carbon,CANETSC has pH controlling ability as a result of theincorporation of magnesite within the carbon granules. CANECAL is used in both fixed and moving beds for continuousde-colorization, after which the carbon can be thermallyreactivated for repeated use. The particle size of 12x40 meshhas been selected to give a high rate of adsorption and lowresistance to flow with liquors of medium viscosity.CANETSC is made from selected grades of bituminous coalcombined with suitable binders to give superior hardness andlong life. Produced under rigidly controlled conditions by hightemperature steam activation, this carbon provides highsurface area, large pore volume, high density, and a porestructure optimal for the adsorption of color bodies fromsolution

CuO, wt% Expressed as CuO, 5%min
Apprarent Density for base carbon, 0.45 g/ml min, 0.55g/ml max, ASTM D 2854
Ball-Pan hardness, 95min. ASTM D3802
Particle Diameter, 4±0.4mm， ASTM D2862
Moisture, as packed, 15%max, ASTM D 2867
Carbon Tetrachloride, base carbon, 60% min, ASTM D 3467-94

Warning: Operating below 350 centigrade, otherwise burning would happen.

Lead time: 15-30days after order confirmation and 30% downpayment.

KI impregnated, 1.8 %min
Apprarent Density for base carbon, 0.45 g/ml min, 0.55g/ml max, ASTM D 2854
Ball-Pan hardness, 95min. ASTM D3802
Particle Diameter, 4±0.4mm， ASTM D2862
Moisture, as packed, 15%max, ASTM D 2867
Carbon Tetrachloride, base carbon, 60% min, ASTM D 3467-94

Warning: Operating below 350 centigrade, otherwise burning would happen.

Lead time: 15-30days after order confirmation and 30% downpayment.

KOH, wt% Expressed as KOH, 7%min
Apprarent Density for base carbon, 0.45 g/ml min, 0.55g/ml max, ASTM D 2854
Ball-Pan hardness, 95min. ASTM D3802
Particle Diameter, 4±0.4mm， ASTM D2862
Moisture, as packed, 15%max, ASTM D 2867
Carbon Tetrachloride, base carbon, 60% min, ASTM D 3467-94

Warning: Operating below 350 centigrade, otherwise burning would happen.

Lead time: 15-30days after order confirmation and 30% downpayment.